Possible cause 2: improper processing parameter(s) Solution: Choose the correct material in XCS and proceed with the default processing parameters. Possible cause 1: Wrong material option selected in XCS. #2 Failed to laser-cut through a material. Solution 4: Reduce the height of the material to be processed, for example, using a thinner material or removing the triangular prism Solution 2: Place the material right under the camera. Solution 1: Use the Framing function on XCS to preview the processing area and thus ensure that the expected area of the material is processed. We are working to improve the algorithm, and the deviation will be reduced. The farther a design element is away from the camera and the farther the surface of the material to be processed is away from the baseplate, the greater the deviation is. The device, baseplate, material, and other elements, however, are not absolutely planar, which causes deviation during the processing. In the algorithm for processing the images, the images captured by the camera are processed as absolutely planar. Images captured by the camera are processed and presented as planar images. Possible cause: xTool M1 adopts fisheye cameras. Processing-related FAQ: #1 There is a position difference with the actual result than as shown in the picture captured by the camera.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |